 |
|
The Trim Bender is a portable
tool that allows you to curve 20-gauge angle up to 3” x 3”
quickly, accurately and conveniently on the job
site. It eliminates the need for old-fashioned tin snips and the
trial-and-error method of making the right radius. With the Trim
Bender, you have the power to create curved soffits to almost any
radius specification.
Just look in a chart to find the angle
you want, dial it in, and squeeze to create an accurate bend. Once
set,
the Trim Bender will bend the angle
to the same radius, piece after
piece, all day long. Just as quickly,
you can change the radius at any
time simply by turning the dial.
Compact and easy to use, this remarkable system
forms the
exact curve you want by creating compound indentations at
consistent intervals along the
length of the angle. You can space
the indents at intervals of 2, 3, 4, 6
or 8 inches (or 50, 75, 100, 150, or
200 mm).
Once a piece of angle is bent into
a radius, it is capable of spanning distances in excess of 3 feet
(1M) between supports, significantly reducing installation time.
|
|
|
|
 |
 |
| TRIM BENDER BENEFITS
|
- Creates almost any radius
quickly and easily
- Makes replicating curves an
efficient process
- Retains material strength so
there is no need for additional
steel or plywood reinforcement
- Quickly bends up to
20-gauge 3” x 3” angle
- Requires no electricity
|
|
 |
|
|
Download a :: PRODUCT
SHEET :: (PDF format) for Trim Bender.
To order a Trim Bender or get
answers to your questions, call
Radius
Track at 888-872-3487.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
We cut our time in half by using
the Trim Bender. It's a precision-
made tool that's simple to use
and effective - a must for framers creating radii, ellipses or any
other type of curved soffits. It's a
huge time-saving device.
Mark Pieper, RTL Drywall
Construction
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
|
