The Radius Track Bender® is an ingenious, portable, on-the-job site tool that allows you to create curved studs and track runners easily, accurately and conveniently. The Track Bender can form all standard stud and track profiles up to 20-gauge thick and 6 inches wide – without requiring you to cut or slit the metal.

Compact and easy to use
This remarkable system forms the exact curve you want by creating compound indentations at consistent intervals along the length of the material. You can space the indents as close as 2 inches for a tight radius, and up to 12 inches on center for a larger radius. For any curve you make with Track Bender®, the studs and track retain their strength and rigidity. In addition, the Track Bender® operates on powerful mechanical leverage without electricity, compressed air or outside power sources.

No plywood or strapping needed
You can easily and simply create a curved member that is complete and ready for installation in minutes instead of hours with no additional reinforcements necessary. In fact, no straps or additional steel is needed to maintain the desired curvature. And because it saves so many labor hours, building curved walls only costs about 10 percent more than making straight walls.

Built to last and last and last.
Tough heavy-gauge steel construction throughout assures a smooth, trouble-free operation you can count on job after job.

Track Bender Models & Capabilities

S150
20 and 25 Gauge Material
2 1/2" to 6" wide track or studs
Leg length up to 1 5/8" high
Minimum Radius
2 1/2" Material: Approximately 13" Minimum Radius with 2" spacing
3 1/2" - 4" Material: Approximately 19" Minimum Radius with 2" spacing
5 1/2" - 6" Material: Approximately 27" Minimum Radius with 2" spacing

D150
20 and 25 Gauge Material
2 1/2" to 6" wide track or studs
Leg length up to 3: high
Minimum Radius
2 1/2" Material: Approximately 13" Minimum Radius with 2" spacing
3 1/2" – 4" Material: Approximately 19" Minimum Radius with 2" spacing
5 1/2" – 6" Material: Approximately 27" Minimum Radius with 2" spacing

Need more information about Track Bender?

Download a Product Sheet (PDF) for Track Bender.
Download a Manual (PDF) for Track Bender.

Radius Track

Flexible
Framing Profiles
& Job Site Tools

Buy Products

Choosing Radius Track® products and services guarantees you will find the curved framing solution to fit your project needs. Our job-site solutions provide do-it-yourself satisfaction when a same day solutions is needed or you have the skilled labor to utilize one of our Radius Track Bender® or Radius Trim Bender® tools.

Track Bender® & Trim Bender® Curved Framing Tools

Our patented hand tools make it incredibly simple and easy to create curved walls and soffits quickly and accurately right on the jobsite. Best of all, you’ll save enormous amounts of man hours building perfect curves job after job after job.

Purchase Ready Products

For Pricing and Purchasing Information, give us a call at 888-872-3487 or click here to find and contact your Radius Track® Sales Representative.